MDL-80 fully hydraulic multifunctional drilling rig

1. Integrated operating table, easy to use and operate.

2. Two upper and lower control valves are set for easy construction and operation.

3. Suitable for conventional drilling, alloy drilling and spiral drilling with down-the-hole hammer.

Main technical parameters

Main drilling methods: conventional drilling with down-the-hole hammer, alloy drilling, spiral drilling.

1. Drilling diameter (mm): φ100～φ210

2. Drilling depth (m): 0～70

3. Drilling angle (°): -10～90

4. Drill rod diameter (mm): φ73, φ89

5. Rated output torque (Nm): 4200

6. Rated speed (r/min): 16/30/38/55/75/105

7. Lifting speed (m/min): 0～5 adjustable, 7, 23, 30

8. Feed speed (m/min): 0～10 adjustable, 14, 46, 59

9. Gyro lift force (kN): 65

10. Gyro pressure (kN): 33

11. Gyro line Stroke (mm): 1800

12. Sliding stroke (mm): 600

13. Power: diesel engine (power: 42KW)

14. Weight (kg): 1300

15. Crawler climbing angle: ≤25°

16. Main engine vertical state: 2500×1800×3500

17. Main engine horizontal state: 3000×1800×1500

Note: The above parameters are subject to change without further notice, please refer to the actual product.